Home / Recent Work / Improvisation #4, made from scrap of brass sheet, 10" x 5.5" x 2" / Improvisation #4, how it was made 
Creation date / 2018 / February
- 1. This is a scrap of 16 gauge brass, about 10" long, what was in between a few other rounded shapes that had been cut out for other projects. When I saw the shape it reminded me of a four-legged animal running.
- 2. Using the hydraulic press to push out a face.
- 3. It did just what I wanted it to do.
- 4. I didn't get pictures of a lot of the earliest forming. All the pointed parts have been formed, using the technique shown in picture #7. Here I am using the ball stake shown in the inset to round out the body.
- 5. Using the stake shown at the top to form the neck area.
- 6. For the tighter curve near the edges, I used this stake shown on the left.
- 7. Forming the tail some more, tightening the curve.
- 8. Annealing the whole piece, to make the metal malleable again after having been thoroughly work-hardened.
- 9. Pushing out the face some more, with a more pointed tool.
- 10. Looking a little better all the time.
- 11. Forming the head some more on the same tool used to punch it.
- 12. Making the neck curve a little more.
- 13. Using the stake shown on the left to do the final planishing on the body.
- 14. I annealed the head area one more time and punched it out with an even more pointed tool.
- 15. I did a lot more final forming and planishing, refining the shape in an effort to capture the motion of a running or leaping gazelle. The final touch, to make a hanger for it so it can be hung on a wall.