Home / 15 Most visited 15
-
(27159) 2. Next stage, taking it beyond 90°from flat. -
(26275) 3. After another annealing, going even further. -
(26021) 4. After annealing again, using a snaky stake to close it up even more. -
(20418) 49. Using the tool from the previous image to push the metal further down all the way around. -
(20414) 47. Getting close to where it needs to be. Ready to be annealed. -
(20387) 6. Heavy planishing on the chin area formed in the previous step. -
(20308) 46. The outer part has been brought around nearly 180°. -
(20116) 50. Still a little rough, but it's the right shape. -
(19797) 48. A new tool I made for the next step. -
(19029) 51. Now to start the final piece of the puzzle. Here I have wrapped a ball with a few layers of masking tape, and drawn a spiral line on it. -
(18983) 45. Continuing with the raising, so far so good. -
(18563) 52. I have cut through the masking tape on the line with a knife and can now remove it, like peeling a tangerine. -
(18310) 43. now another phase of the project. Here's a piece of brass sheet cut out and annealed. -
(18258) 55. Shaping from the inside on the sand bag, getting it formed into a ball. -
(18120) 44. Raising a ring. This is the first time I've ever tried this, so I don't know if it will work.