Home / Search results 23
Choose filters
Cancel
Validate
Choose filters
Validate
Validate
Validate
- MobileUsers
- 22. The finished piece.
- 21.Back of the finished piece, screwed onto the piece of wood, a piece of spring wire bent into shape to hang it on a wall.
- 20. The entire seam has been soldered and cleaned up, and now it's time for final planishing. I used the ball stake pictured at the top.
- 19. Here the seam on the bill has been silver-soldered. The seam on the neck will be closed up next and silver-soldered.
- 18. Closing up the seam on the underside of the bill.
- 17. Another special stake (top) to get the bill curved a full 180° around.
- 16. A special stake and punch (left) to put a curved crease in the end of the bill.
- 15. Another stage completed, ready for annealing again.
- 14. Using the special tool on the left to push down both side of the bill at the same time.
- 13. Using a heavy planishing hammer on the neck on a curved stake.
- 12. All the previous steps have been repeated a third time. Checking the angle with a gauge I set from the clay model.
- 11. Annealing again.
- 10. Second stage of raising completed.
- 9. What it looked like after step 8.