Home / Search results 61
Choose filters
Cancel
Validate
Choose filters
Validate
Validate
Validate
- 5. Using this cone-shaped hardwood cavity and the hydraulic press to push out the chin.
- 49. Using the tool from the previous image to push the metal further down all the way around.
- 48. A new tool I made for the next step.
- 47. Getting close to where it needs to be. Ready to be annealed.
- 46. The outer part has been brought around nearly 180°.
- 45. Continuing with the raising, so far so good.
- 44. Raising a ring. This is the first time I've ever tried this, so I don't know if it will work.
- 43. now another phase of the project. Here's a piece of brass sheet cut out and annealed.
- 42. more final planishing, using a hammer that fits the curve.
- 41. Doing the final planishing.
- 40. Silver-soldering the seam.
- 4. After annealing, stage two of raising complete, ready to anneal again.
- 4. After annealing again, using a snaky stake to close it up even more.
- 39. Gone full circle, getting the seam closed up.
- 38. More heavy planishing on the large ball stake.